1. Booting of Stenter 
 
1.1 Click the cloth feed mechanism button to enter the cloth feed mechanism operation interface, and click the cloth feed master control switch in the upper left corner to red. 
1.2 Click the cloth discharg...

　　 The method of applying ink on the etching plate (steel plate) with open rotary printer: There are many ways to apply ink on the etching plate. 　　 First spray the ink on the etching plate, and then use a retractable scraper to scrape off the excess...

The printing of the open rotary printer belongs to stencil printing, which is called the four major printing methods together with flat printing, embossing and gravure printing. Hole printing includes transcription, perforated pattern, spray and screen pr...

Digital sampling of rotating production: is it effective?Due to the above advantages, even if the final design is printed with rotary screen printing on an open rotary printer, printing digital samples seems to be a good idea. However, there is one main a...

Why use open rotary printer?One of the reasons why screen printing technology is so widely used is because it can produce bright colors even on darker fabrics. The ink or paint is also located in the layer on the surface of the fabric or paper, which make...

If you are using an open rotary printer, another factor that must be considered is the printing order. Do you print the digital part of the design first, or should you start with the part of the design that you want to use rotary printing? Let's take a fl...

The servo motor used in Flat Screen Printer Factory's fully automatic screen printing machine is also called an executive motor, or a control motor. In the automatic control system, the servo motor of the electric screen printing machine is an actuator. I...

Flat Screen Printer Factory chemicals: pretreatment and printing paste
Reactive inks, acidic inks, and dispersion inks require chemicals to bind color molecules to the fibers during the steaming process. In rotation, these chemicals are part of the print...

Stenter's special glossy printing is a new printing technique that has prevailed in the packaging printing industry in recent years. Special gloss refers to the printed products printed with this technology, and its surface gloss effect is different from ...

Stenter is a device that prints solder paste or patch glue onto PCB pads through a screen. Mainly used in the electronic processing industry, printed circuit board silk screen logo, instrument shell panel logo, solder paste printing in the process of circ...

Deciding which dryer is best for your Stenter operation can be a challenging decision. Asking the right questions is the ideal first step in determining which dryer is best for your needs. Here are some questions to help you get started:
What are the ele...

What is the reason for the color fade after Stenter printing? Nowadays, screen printing machines are widely used in our country. On the one hand, the use of screen printing machines can speed up production power to a certain extent and achieve better econ...

     In general, if you want the Flat Screen Printing Machine to operate safely and normally, the following basic conditions should be met:
    , During use, the Stenter setting machine equipment should be cleaned regul...

At this stage, there are many well-known brands of Stenter on the market. The needle plate is a base plate made of copper and aluminum alloy. The key application is general sewing needles. When the setting machine starts at a rate of approximately 60 mete...

        1. Key points of ink layer thickness and occlusion rate when printing on open rotary screen printer
        2. Open rotary screen printer printing raw material storage standard...