Chill - Member Profile - licheng flatprinter

Информация пользователя

Уровень пользователя: Пользователь
Просмотры профиля: 25 views
Друзья: 0 friends
Последнее обновление: 24 августа 2021 г.
Дата регистрации: 26 декабря 2019 г.

licheng flatprinter

licheng flatprinter пишет новую запись в блоге:

Stenter Boot Introduction

1. Booting of Stenter

1.1 Click the cloth feed mechanism button to enter the cloth feed mechanism operation interface, and click the cloth feed master control switch in the upper left corner to red.
1.2 Click the cloth discharg...
- 24 августа 2021 г.
licheng flatprinter пишет новую запись в блоге:

Operation Of Open Rotary Printer

　　 The method of applying ink on the etching plate (steel plate) with open rotary printer: There are many ways to apply ink on the etching plate. 　　 First spray the ink on the etching plate, and then use a retractable scraper to scrape off the excess...
- 10 августа 2021 г.
licheng flatprinter пишет новую запись в блоге:

Flat Screen Printer Factory Introduces The Features Of The Prod

The printing of the open rotary printer belongs to stencil printing, which is called the four major printing methods together with flat printing, embossing and gravure printing. Hole printing includes transcription, perforated pattern, spray and screen pr...
- 3 августа 2021 г.
licheng flatprinter пишет новую запись в блоге:

Introduction Of Flat Screen Printer Factory Printing Method

Digital sampling of rotating production: is it effective?Due to the above advantages, even if the final design is printed with rotary screen printing on an open rotary printer, printing digital samples seems to be a good idea. However, there is one main a...
- 27 июля 2021 г.
licheng flatprinter пишет новую запись в блоге:

Introduction To The Use Of Open Rotary Printer

Why use open rotary printer?One of the reasons why screen printing technology is so widely used is because it can produce bright colors even on darker fabrics. The ink or paint is also located in the layer on the surface of the fabric or paper, which make...
- 20 июля 2021 г.
licheng flatprinter пишет новую запись в блоге:

How To Print By Open Rotary Printer

If you are using an open rotary printer, another factor that must be considered is the printing order. Do you print the digital part of the design first, or should you start with the part of the design that you want to use rotary printing? Let's take a fl...
- 13 июля 2021 г.
licheng flatprinter пишет новую запись в блоге:

How To Control The Accuracy Of Open Rotary Printer

The servo motor used in Flat Screen Printer Factory's fully automatic screen printing machine is also called an executive motor, or a control motor. In the automatic control system, the servo motor of the electric screen printing machine is an actuator. I...
- 6 июля 2021 г.
licheng flatprinter пишет новую запись в блоге:

Introduction Of Flat Screen Printer Factory Preprocessing

Flat Screen Printer Factory chemicals: pretreatment and printing paste
Reactive inks, acidic inks, and dispersion inks require chemicals to bind color molecules to the fibers during the steaming process. In rotation, these chemicals are part of the print...
- 29 июня 2021 г.
licheng flatprinter пишет новую запись в блоге:

Introduction Of Flat Screen Printing Machine Products

Stenter's special glossy printing is a new printing technique that has prevailed in the packaging printing industry in recent years. Special gloss refers to the printed products printed with this technology, and its surface gloss effect is different from ...
- 22 июня 2021 г.
licheng flatprinter пишет новую запись в блоге:

How Does The Flat Screen Printing Machine Factory Deal With Fau

Stenter is a device that prints solder paste or patch glue onto PCB pads through a screen. Mainly used in the electronic processing industry, printed circuit board silk screen logo, instrument shell panel logo, solder paste printing in the process of circ...
- 15 июня 2021 г.
licheng flatprinter пишет новую запись в блоге:

Work Introduction Of Flat Screen Printing Machine

Deciding which dryer is best for your Stenter operation can be a challenging decision. Asking the right questions is the ideal first step in determining which dryer is best for your needs. Here are some questions to help you get started:
What are the ele...
- 1 июня 2021 г.
licheng flatprinter пишет новую запись в блоге:

Solution To The Color Fade After Stenter Printing

What is the reason for the color fade after Stenter printing? Nowadays, screen printing machines are widely used in our country. On the one hand, the use of screen printing machines can speed up production power to a certain extent and achieve better econ...
- 25 мая 2021 г.
licheng flatprinter пишет новую запись в блоге:

The Efficiency Of Stenter's Work

In general, if you want the Flat Screen Printing Machine to operate safely and normally, the following basic conditions should be met:
, During use, the Stenter setting machine equipment should be cleaned regul...
- 18 мая 2021 г.
licheng flatprinter пишет новую запись в блоге:

Flat Screen Printing Machine Factory Introduces The Selection O

At this stage, there are many well-known brands of Stenter on the market. The needle plate is a base plate made of copper and aluminum alloy. The key application is general sewing needles. When the setting machine starts at a rate of approximately 60 mete...
- 11 мая 2021 г.
licheng flatprinter пишет новую запись в блоге:

Hot Air Stenter Use Regulations

1. Key points of ink layer thickness and occlusion rate when printing on open rotary screen printer
2. Open rotary screen printer printing raw material storage standard...
- 1 сентября 2020 г.

Stenter Boot Introduction

Опубликовал 24 августа 2021 г.

1. Booting of Stenter 1.1 Click the cloth feed mechanism button to enter the cloth feed mechanism operation interface, and click the cloth feed master control switch in the upper left corner to red. 1.2 Click the cloth discharging mechanism button to enter the cloth disch...
Operation Of Open Rotary Printer

Опубликовал 10 августа 2021 г.

　　 The method of applying ink on the etching plate (steel plate) with open rotary printer: There are many ways to apply ink on the etching plate. 　　 First spray the ink on the etching plate, and then use a retractable scraper to scrape off the excess ink. At this time, the solvent remaining in ...
Flat Screen Printer Factory Introduces The Features Of The Prod

Опубликовал 3 августа 2021 г.

The printing of the open rotary printer belongs to stencil printing, which is called the four major printing methods together with flat printing, embossing and gravure printing. Hole printing includes transcription, perforated pattern, spray and screen printing, etc. The principle of stencil printin...
Introduction Of Flat Screen Printer Factory Printing Method

Опубликовал 27 июля 2021 г.

Digital sampling of rotating production: is it effective?Due to the above advantages, even if the final design is printed with rotary screen printing on an open rotary printer, printing digital samples seems to be a good idea. However, there is one main aspect to keep in mind here. The quality of d...
Introduction To The Use Of Open Rotary Printer

Опубликовал 20 июля 2021 г.

Why use open rotary printer?One of the reasons why screen printing technology is so widely used is because it can produce bright colors even on darker fabrics. The ink or paint is also located in the layer on the surface of the fabric or paper, which makes the printed product pleasant to the touch. ...

Просмотреть все записи

Информация пользователя

licheng flatprinter

Персональная информация

Контактная информация

Личные данные