Hot Air Stenter Use Regulations

• Posted by licheng flatprinter 1 сентября 2020 г. - Загруженный в Бизнес - #hot air stenter  #open rotary screen printer  - 2 просматривают

          1. Key points of ink layer thickness and occlusion rate when printing on open rotary screen printer

          2. Open rotary screen printer printing raw material storage standard

          Three, open rotary screen printer printing printing ink characteristics regulations

          Four, open rotary screen printer screen materials should be selected according to the surface conditions of the printing process before printing

          5. The open rotary screen printer has a clear and good silk screen image resolution before printing:

          Generally speaking, when printing on an open rotary screen printer, if the screen with a perforation that exceeds the diameter of the screen, a screen with a hole smaller than the diameter of the screen can produce a higher resolution. Therefore, pay attention to the following when choosing a network;

          B. The lower the total contact area between the printing surface and the printing process, the better

          D. Hot Air Stenter needs to consider the relationship between the wire diameter and the ultimate supporting force in order to meet the printing regulations.