The Efficiency Of Stenter's Work

• Posted by licheng flatprinter 18 мая 2021 г. - Загруженный в Бизнес - #flat screen printing machine  #Stenter  - 9 views

       In general, if you want the Flat Screen Printing Machine to operate safely and normally, the following basic conditions should be met:

      , During use, the Stenter setting machine equipment should be cleaned regularly. Especially with regard to the gears, chains, belt pulleys, etc. of the transmission part, if there is dust or socks caught in the inspection, it should be removed in time. The wear of the belts should be checked once a day, and the rail guide, sock plate seat, and even iron must be refueled once every shift. In addition, every gear reducer should do an oil change every six months.

      Second, the chains related to the stenter setting machine equipment should be checked once a week. The moving sock plate is connected with two chains, so as to be tighter. It is better to loosen the other parts of the chain manually, and there is no jump.

      Third, during the operation of the stenter setting machine, try to avoid pressing the stop button directly to ensure the normal operating speed of the machine. If you need to change the material, you can reduce the speed of the vehicle, or increase the number of personnel, and do not stop at will.

      Fourth, if the equipment of the stenter setting machine is accidentally caused to be abnormal, the specific operating conditions of the equipment before the failure should be understood in detail to increase the repair speed and reduce the parking time, so as to ensure the operation rate.

      Fifth, Stenter's work efficiency has a lot to do with the operating skills of the operators. Generally speaking, reducing the number of times the socks are dropped can greatly improve the operating rate of the stenter setting machine.